Vitodens 222-F B2TA 3.2 to 35 kW
Vitodens 222-F B2TA 3.2 to 35 kW
| ID | Parts Number | Part Description | Notes | Purchase |
|---|---|---|---|---|
| 1 | Front panel, top | |||
| 2 | Logo | |||
| 3 | Toggle fastener (set) | |||
| 4 | Cover panel with profiled seal | |||
| 5 | Profiled seal | |||
| 6 | Adjustable foot | |||
| 7 | Control unit support | |||
| 8 | Side panel, right | |||
| 9 | Side panel, left | |||
| 10 | Primary store mounting bracket | |||
| 11 | Top panel insert | |||
| 12 | Top panel | |||
| 13 | Front panel, bottom | |||
| 14 | Location stud fixings (2 pce) | |||
| 1 | Hydraulic block | |||
| 2 | Set of plug-in connector retainers (2 pce) | |||
| 3 | Diaphragm grommet (5 pce) | |||
| 4 | Diaphragm grommet (5 pce) | |||
| 5 | Clip Ø 8 (5 pce) | |||
| 6 | Clip Ø 10 (5 pce) | |||
| 7 | Clip Ø 15 (5 pce) | |||
| 8 | Clip Ø 18 (5 pce) | |||
| 9 | Air vent valve G3/8 | |||
| 10 | Spring clip (5 pce) | |||
| 11 | Connection pipe HR | |||
| 12 | Pipe clip Ø 18 / 1.5 | |||
| 13 | Fascia ? 13-19 kW Ø 4.0 (white) ? 26 kW Ø 5.5 (dark grey) ? 35 kW Ø 6.0 (beige) | |||
| 14 | Pipe clip Ø 18 | |||
| 15 | Union nut G1 | |||
| 16 | Sleeve | |||
| 17 | Heating water flow connection pipe | |||
| 18 | DHW connection pipe | |||
| 19 | Connection pipe, cold water, cylinder | |||
| 20 | Expansion vessel connection line G 3/8 | |||
| 21 | Cold water hydraulic connection | |||
| 22 | Pump motor | |||
| 23 | CIL casing | |||
| 24 | Cartridge non-return valve | |||
| 25 | Shut-off valve, cold water, cylinder | |||
| 26 | Round sealing ring 8 x 2 (5 pce) | |||
| 27 | Connection line, DHW charging | |||
| 28 | Shut-off valve, DHW, cylinder | |||
| 29 | Flow pipe | |||
| 30 | Expansion vessel | |||
| 31 | Connection pipe, cold water | |||
| 32 | Heating water return connection pipework | |||
| 33 | Thermal circuit breaker | |||
| 34 | Hose 10 x 1.5 x 1500 | |||
| 35 | Pressure gauge | |||
| 36 | Safety valve | |||
| 37 | Connection pipe, heating water flow, heat cell | |||
| 38 | Air vent valve | |||
| 39 | Circulation pump motor | |||
| 40 | CIAO casing | |||
| 41 | Gasket A 17 x 24 x 2 (5 pce) | |||
| 42 | Gasket 23 x 30 x 2, green (5 pce) | |||
| 43 | Temperature sensor | |||
| 44 | Gasket A 16 x 24 x 2 (5 pce) | |||
| 45 | Cap G 3/4 SW 30 | |||
| 46 | Gasket A 10 x 15 x 1.5 (5 pce) | |||
| 47 | O-ring 17.86 x 2.62 (5 pce) | |||
| 48 | O-ring 14.3 x 2.4 | |||
| 49 | Spring clip DN 25 (5 pce) | |||
| 50 | Plug | |||
| 51 | Gasket A 23 x 30 x 2, orange (5 pce) | |||
| 1 | Return unit | |||
| 2 | Profiled gasket | |||
| 3 | Plug Ø 8/Ø 10 | |||
| 4 | Clip Ø 8 (5 pce) | |||
| 5 | Clip Ø 10 (5 pce) | |||
| 6 | Clip Ø 18 (5 pce) | |||
| 7 | Hydraulic retaining bracket | |||
| 8 | Plate heat exchanger insulation board | |||
| 9 | Plate heat exchanger insulation shell | |||
| 10 | Overflow pipe | |||
| 11 | Flow unit | |||
| 12 | Valve insert | |||
| 13 | Overflow valve | |||
| 14 | O-ring 17.86 x 2.62 (5 pce) | |||
| 15 | Gasket A 17 x 24 x 2 (5 pce) | |||
| 16 | O-ring 9.6 x 2.4 (5 pce) | |||
| 17 | Temperature sensor | |||
| 18 | Plate heat exchanger | |||
| 1 | Primary store | |||
| 2 | Strain relief | |||
| 3 | Magnesium anode | |||
| 4 | Gasket | |||
| 5 | Flange with gasket | |||
| 6 | Cover | |||
| 7 | Gasket 23 x 30 x 2 (5 pce) | |||
| 8 | Sleeve | |||
| 9 | Flange insulation | |||
| 10 | Cylinder temperature sensor NTC 10k? | |||
| 1 | MatriX cylinder burner | |||
| 2 | Locking clip, condensate drain | |||
| 3 | Profile hose, heating return | |||
| 4 | Condensate collector | |||
| 5 | Flue gasket | |||
| 6 | Siphon | |||
| 7 | Condensate hose | |||
| 8 | Pipe clip Ø 18 / 1.5 | |||
| 9 | Flue gas temperature sensor | |||
| 10 | Boiler flue connection | |||
| 11 | Heat exchanger | |||
| 12 | Gas pipe | |||
| 13 | Condensate hose | |||
| 14 | O-rings 35.4 x 3.59 (5 pce) | |||
| 15 | Gasket A 17 x 24 x 2 (5 pce) | |||
| 16 | Hose 19 x 600, corrugated | |||
| 17 | Spring clip DN 25 (5 pce) | |||
| 18 | Hose 19 x 270, corrugated | |||
| 19 | Hose 19 x 500, corrugated | |||
| 20 | Boiler flue connection plug | |||
| 21 | Gasket DN 60 | |||
| 22 | Diaphragm grommet (5 pce) | |||
| 23 | Heating water return connection elbow | |||
| 24 | Thermal insulation block | |||
| 25 | O-ring 63 x 2.62 (5 pce) | |||
| 1 | Burner gasket (wearing part) | |||
| 2 | Thermal insulation ring | |||
| 3 | Cylinder burner gauze assembly | |||
| 4 | Burner gauze assembly gasket | |||
| 5 | Ignition electrode (wearing part) | |||
| 6 | Ionisation electrode (wearing part) | |||
| 7 | Gasket, burner door flange (wearing part) | |||
| 8 | Radial fan | |||
| 9 | Gas train | |||
| 10 | Burner door | |||
| 11 | Ignition unit | |||
| 12 | Ionisation electrode gasket (5 pce) | |||
| 13 | Ignition electrode gasket (5 pce) | |||
| 14 | Blade terminal (10 pce) | |||
| 15 | Mixture restrictor | |||
| 16 | Gas nozzle ? 13 kW/19 kW: 02 yellow ? 26 kW: 04 grey ? 35 kW: 06 black | |||
| 17 | Venturi extension | |||
| 18 | Mounting plate, thermal insulation ring (2 pce) | |||
| 19 | Gasket DN 65 | |||
| 1 | Control unit | |||
| 2 | Control unit casing back panel | |||
| 3 | Coding card | |||
| 4 | Fuse 6.3 A (slow) (10 pce) | |||
| 5 | Fuse holder | |||
| 6 | Programming unit for constant temperature mode | |||
| 7 | Programming unit for weather | |||
| 8 | LON module | |||
| 9 | PCB adaptor | |||
| 10 | Cable harness X8/X9/ionisation | |||
| 11 | Cable harness 100/35/54/PE | |||
| 12 | Power cable, stepper motor | |||
| 13 | Mating plug (set) | |||
| 14 | Cable fixing | |||
| 15 | Locking bolts, left and right | |||
| 17 | Wireless outside temperature sensor | |||
| 18 | Outside temperature sensor (hardwired) | |||
| 19 | KM BUS cable 145 | |||
| 20 | Internal extension H1 | |||
| 21 | Internal extension H2 | |||
| 1 | Special grease | |||
| 2 | Spray paint, Vitowhite | |||
| 3 | Touch-up paint stick, Vitowhite | |||
| 4 | Installation and service instructions | |||
| 5 | Operating instructions for constant temperature mode | |||
| 6 | Operating instructions for weather compensated mode |